VP68 with UR2 Handheld Transmitter

UR2 handheld wireless transmitter with VP68 Microphone Capsule
 
close

Find stores in my area:


Show Online Shops

VP68 capsule with omnidirectionalEqually sensitive to sound from all directions, but cannot be „aimed“ to isolate one area.Read moreGo to the glossary polar patternPolar pattern describes how well the microphone hears sound from different directions.Read moreGo to the glossary coupled with premier wireless UR2 transmitter.
  • Description
  • Features
  • Specs
  • Frequency Versions

Description:

The VP68 on the UR2 transmitter features an omnidirectionalEqually sensitive to sound from all directions, but cannot be „aimed“ to isolate one area.Read moreGo to the glossary polar patternPolar pattern describes how well the microphone hears sound from different directions.Read moreGo to the glossary with excellent sound quality and is tailored for interview applications.

The flagship UR2 Wireless Handheld Transmitter offers the most advanced features and controls including a bit-mapped backlit LCD display, infrared automatic transmitter sync and switchable RF power. It also has frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary and power lockout cabability and can be used continuously for up to 8 hours using 2 x AA Batteries (included). The UR2  is made from an all-metal die-cast construction for maximum durability.

This transmitter requires the UR4D, UR4S or UR5 receiver to complete the system.

All Shure wireless transmitter designs allow for interchangeable microphone heads

Features:
  • Switchable RF power (10/50 mW country dependant)
  • Infrared transmitter sync
  • Bit-mapped backlit LCD
  • Ergonomic design
  • All-metal die-cast construction
  • FrequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary and power lockout
  • 2 “AA” batteries (included) for more than 8 hours continous use

Specs:
  • Dimensions: 253 mm x 51 mm
  • Battery, endurance: 2AA, 9.5 hours (low power) or 6 hours (high power)
  • Weight: 360 g
  • Further technical specifications:
    • RF Carrier FrequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary Range: 470-865 MHz, depending on region
    • Working Range
      • 150 m (500 ft.), under typical conditions
      • 500 m (1600 ft) line-of-sight, outdoors for a single system
      • NOTE: Actual working range depends on RF signal absorption, reflection and interference
    • Audio Frequency ResponseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up.Read moreGo to the glossary: 40 – 20,000 Hz,(+1 dB, –3 dB).
      • NOTE: Overall system frequency responseThis is the range of frequencies, from the lowest to the highest, that a mic can pick up.Read moreGo to the glossary depends on the microphone element
    • Gain Adjustment Range: –10 to +20 dB
    • Modulation: FM (45 kHz max. deviation), compander system with pre- and de-emphasis
    • RF Power Output: 10 / 50 mW
    • Dynamic RangeThis is the difference between the queitest and loudest sound that a mic can pick up.Read moreGo to the glossary: >105 dB, A-weighted
    • Signal Polarity: Positive pressure on microphone diaphragm produces positive voltage on XLR output pin 2 with respect to XLR pin 3 and on the tip of the 1/4-inch output jack.
    • System Distortion (ref. ± 45 kHz deviation, 1 kHz modulation): <0.3% Total Harmonic DistortionTotal Harmonic Distortion is a measure of how much electrical noise a device produces. Read moreGo to the glossary typical
    • Current Drain:
      • 180 mA max. (normal RF power setting)
      • 240 mA max. (high RF power setting)
    • Operating Temperature Range: –18° to +57° C (0° to +135° F)
      • NOTE: Battery characteristics may limit this range
      • NOTE: Electrical safety approval is based on a maximum ambient temperature of 35°C (95°F).
    • Housing: Aluminum die-cast handle and aluminum machined battery cup
    •

    Frequency Versions:

    Frequency ranges and power output for the transmitters

    Band    

    Range           

    Power Output

    G1E

    470-530 MHz

    10/50 mW

    J5E

    578-638 MHz 

    10/50 mW

    K4E*

    606-666 MHz

    10/50 mW

    L3E

    638-698 MHz 

    10/50 mW

    M5E

    694-758 MHz 

    10/50 mW

    Q5

    740-814 MHz 

    10/50 mW

    R9**

    790-865 MHz

    10/50 mW

    * Primary UK frequency version covering Channel 38. Usable now and after the 2012 switchover. 

    ** Can be used after 2012 switchover if tuned to licence free deregulated spectrum (863-865) ONLY.

    Channel 38 switchover information and helpline 01992 703038

    Please note that a valid license is required to operate wireless equipment in Channel 38. Contact JFMG at www.jfmg.co.uk for details.